Through interactive discussions and practical exercises, our instructor-led live Industrial Automation courses—available both online and on-site—demonstrate how to program control systems, including computers and robots.
Industrial Automation training can be delivered as "online live training" or "onsite live training". Online live training, also known as "remote live training", is conducted via an interactive remote desktop environment. Onsite live training takes place either at your local customer premises in Prague or at NobleProg's corporate training centers in Prague.
From Prague Main Train Station (Praha hlavní nádraží)
Take tram 9 from Hlavní nádraží toward Sídliště Řepy.
Get off at Újezd.
Walk about 10 minutes toward Malostranské náměstí / Prokopská.
Continue along Prokopská to 296/8.
Alternative: Take the metro C from Hlavní nádraží → Muzeum, change to metro A → Malostranská, then walk across Malá Strana. This involves more walking.
From Prague Bus Station — Florenc
Take metro B from Florenc toward Zličín.
Get off at Můstek.
Change to metro A toward Nemocnice Motol.
Get off at Malostranská.
Walk approximately 10–15 minutes to Prokopská 296/8.
This practical training in Prague addresses ROS-PLC integration and digital twins within industrial automation. You will learn to synchronize robotic systems with PLCs, create digital replicas for simulation, and optimize production workflows via real-time data exchange and sophisticated monitoring methods.
This live, instructor-led training in Prague provides strategic introductory insights into AI for Smart Factories, aimed at decision-makers at the beginner level. Attendees will examine core ML concepts, critical manufacturing applications, and actionable steps for implementing AI initiatives to enhance industrial operations.
This instructor-led, live training in Prague (online or onsite) is designed for intermediate to advanced engineers and technicians who wish to learn how to program, operate, and optimize Fanuc and Epson robotic systems for industrial applications.
Upon completion of this training, participants will be able to:
Comprehend the architecture and functional capabilities of Fanuc and Epson robots.
Program robot trajectories, logical sequences, and sensor integrations.
Apply safety protocols and employ troubleshooting methodologies.
Enhance robotic workflows to boost operational efficiency.
This live, instructor-led course in Prague focuses on RTU configuration, I/O mapping, and SCADA integration. Learners will gain proficiency in communication protocols, logic implementation, and troubleshooting to ensure robust automation and control in power system settings.
This live training session for Prague focuses on integrating Ethernet-based devices within the Allen Bradley ecosystem. Master the configuration of PLCs, HMIs, and routers to achieve seamless communication. Enhance your practical skills in network topology, data exchange, and troubleshooting within industrial automation contexts.
This instructor-led, live training in Prague (online or on-site) targets intermediate-level automation engineers and control system designers who aim to implement motion control solutions using Omron PLCs.
By the conclusion of this training, participants will be able to:
Understand fundamental motion control concepts and their applications.
Configure motion hardware and software in Sysmac Studio.
Program and optimize single-axis and multi-axis motion control.
Implement coordinated motion strategies, including interpolation and synchronization.
This instructor-led, live training in Prague (online or onsite) is aimed at beginner-level to intermediate-level engineers and technicians who wish to master the fundamentals of AB PLCs and apply them to real-world manufacturing scenarios.
By the end of this training, participants will be able to:
Understand the role and applications of AB PLCs in the manufacturing industry.
Program AB PLCs using RSLogix 5000/Studio 5000.
Troubleshoot common issues and perform maintenance on PLC systems.
Design and implement a PLC-controlled system for a manufacturing process.
Demonstrate proficiency in PLC programming through a practical project.
This instructor-led, live training in Prague (online or onsite) is aimed at automation engineers and control system designers who wish to configure, program, and commission Omron Sysmac systems covering NJ/NX controllers, EtherCAT networking, G5/1S/1SA servo drives, NA Series HMI, and NX safety hardware.
Developed by Vector, CANoe is a robust software solution designed for the development, testing, and analysis of in-vehicle networks and Electronic Control Units (ECUs), particularly those utilizing the CAN (Controller Area Network) protocol.
This live, instructor-led course (available online or onsite) targets automotive engineers and testers at beginner to intermediate levels who seek to leverage CANoe for simulating, testing, and analyzing CAN-based communication systems.
Upon completion of this training, participants will be equipped to:
Install and configure CANoe alongside its necessary components
Grasp the core principles of the CAN protocol and message framing
Develop simulations for ECUs and CAN networks using CAPL scripting
Effectively monitor, analyze, and debug CAN traffic
This instructor-led, live training in Prague (online or onsite) is designed for beginner, intermediate, or advanced-level engineers and technicians who wish to use XGT Series PLCs to configure hardware, manage modules, and maintain stable PLC systems.
By the end of this training, participants will be able to identify XGT hardware components, configure PLC system modules, perform backup and diagnostic tasks, and troubleshoot common hardware issues.
This instructor-led, live training session in Prague (online or onsite) is designed for PLC users who want to utilize XG5000 to create, test, download, monitor, and troubleshoot PLC programs.
By the end of this training, participants will be able to: create and manage projects, configure hardware and communications, develop ladder logic, and diagnose PLC faults.
Master the fundamentals of OMRON PLC programming in Prague, with a focus on Ladder Diagram logic, hardware configuration, and industrial automation applications. This course is ideal for engineers and specialists aiming to develop practical proficiency in CX-ONE, memory management, and pneumatic control systems for real-world projects.
This instructor-led, live training in Luxembourg is aimed at beginner to intermediate-level engineers, technicians, and automation professionals who wish to use Python to solve technical problems, automate repetitive tasks, and process industrial data.
By the end of this training, participants will be able to:
Write clear and structured Python scripts for technical use cases
Apply programming logic to engineering-oriented problems
Use Python to process data from CSV, logs, and text files
Automate repetitive engineering and automation workflows
This live, instructor-led training in Prague focuses on Siemens S7-1500 PLC programming, TIA Portal, HMI operations, and variable frequency drive diagnostics. It enables maintenance and automation staff to independently troubleshoot faults in automated production and packaging systems.
Online Industrial Automation training in Prague, Industrial Automation training courses in Prague, Weekend Industrial Automation courses in Prague, Evening Industrial Automation training in Prague, Industrial Automation instructor-led in Prague, Industrial Automation boot camp in Prague, Industrial Automation coaching in Prague, Industrial Automation instructor in Prague, Industrial Automation one on one training in Prague, Industrial Automation on-site in Prague, Evening Industrial Automation courses in Prague, Industrial Automation classes in Prague, Weekend Industrial Automation training in Prague, Industrial Automation instructor-led in Prague, Industrial Automation trainer in Prague, Industrial Automation private courses in Prague, Online Industrial Automation training in Prague
